**倍加福計數器,P+F轉速計**
                
            
            
            
            
            如果您對該產品感興趣的話,可以
            
                產品名稱: **倍加福計數器,P+F轉速計** 
            
            
                產品型號: KC-LCD-24-24VDC 
            
                產品展商: P+F倍加福
            
            
            
            
                產品文檔: 無相關文檔
            
            
            
            
                簡單介紹
            
            
                **倍加福計數器,P+F轉速計**
傳感器供電 14.4 ... 27.6 V DC 
max. 50 mA at 230 VAC 
與標準和規范體系的一致性 
            
            
                **倍加福計數器,P+F轉速計**
                 的詳細介紹
            
        
            **倍加福計數器,P+F轉速計**
計時器 參考計數通過時序門輸入 (FrErun),
計數輸入A: 開始,計數輸入B: 停止 (InpA.InpB.),
計數輸入 B:開始/停止 (InpB.InpB.), 
開關電壓 max. 250 V AC / 110 V DC 
開關電流  3 A AC/DC,小 30 mA DC, 
Counter/Timer, Adding/subtracting via 2 
小數點 0 到 5個小數位 開關電源 max. 750 VA / 90 W 
機械壽命 2 x 107 switching cycles 
電氣壽命 在 3 A時,5 x 104個周期 
響應時間 < 15 ms pulse counter 
比例因數 0.0001 ... 99.9999 
連接器 Counter inputs: A and B 
Control/reset inputs: LOCK, RESET 
計數頻率 30 Hz / 5 kHz 
小脈沖周期 Control/reset inputs: static / 1 ms 
脈沖計數器 帶方向檢測計數(cnt.dir),
separate inputs, Batch controller with 1 
pre-selection, Easy-to-read, 2-line LCD display with 
symbols for indicated pre-selection and output status,
Display range and preselection range from -999999 up to 999999
數據存儲 > 10 years, EEPROM 
類型 2線,26位帶符號數字液晶顯示器 
顯示值 digit height 9 mm 
低電壓指令 2006/95/EC EN 61010-1:2001; protection class: 2 
EMC 指示 2004/108/EC EN 61000-6-2:2005, EN 50295:1999  
輻射干擾 DIN EN 55011:2009,等級 B 
機械負荷能力 EN 60068-2-6:2008 
10 … 55 Hz / 1 mm / XYZ 
30 min in each direction 
抗震動和沖擊性 EN 60068-2-27:1995 
100 G / 2 ms / XYZ易讀的, 帶符號的2行 LCD 顯示預設值和輸出狀態
3 times in each direction 
環境溫度 -10 ... 50 °C (14 ... 122 °F) 
儲存溫度 -25 ... 75 °C (-13 ... 167 °F) 
相對濕度 ≤ 93 % at 40 °C
外形尺寸 48 mm x 48 mm x 109.8 mm 
預設值 digit height 7 mm 
互鎖鍵 通過在“鎖定”端輸入“*”電平